In stock - ready to ship
International shipping is available
Applications
- Self-levelling floor screed;
- Cement grout;
- Injection grout;
- Pumpable cement mortar;
- Fine concrete mixtures;
- Shotcrete mixtures;
- Concrete repair mortar;
- Abrasive construction materials with grain sizes up to 16 mm.
Maximum grain size
16 mm
Working Pressure
25 bar
Output at 200 rpm
340 l/min
Output at 400 rpm
680 l/min
Rubber Hardness
Hard
Connection Type
L
Rotation Direction
Clockwise
Rotor Material
Steel or cast iron (depending on version)
Stator Material
Steel housing + rubber inner lining
Color Stator
Yellow
PFT ZP 3 XXL; Putzmeister S8; Putzmeister SP 20; Putzmeister SP 25; Putzmeister Transmix; Brinkmann FHS 200/250.
HOW TO ORDER
Select a set for your equipment
The set can be ordered for scheduled replacement, repair of a plastering station, or restoration of stable material flow.
If the exact model is unknown, we can check compatibility by photo, part marking, or equipment model.
If the exact model is unknown, we can check compatibility by photo, part marking, or equipment model.
By equipment model
Specify the model of your plastering station or mortar pump so we can check set compatibility.
By part photo
If the marking is missing, you can send a photo of the current rotor, stator, or the entire set.
By specifications
We can process a request based on parameters: grain size, pressure, capacity, and material type.
For regular supplies
Suitable for service companies, construction organizations, and technical departments that maintain equipment.
REQUEST
Request a quote
Fill out the form and attach the available data.
If there is no technical documentation, a photo of the part, equipment model, or material description is enough.
If there is no technical documentation, a photo of the part, equipment model, or material description is enough.
What helps us calculate the cost faster
Equipment model, photo of the current set, quantity, delivery country, material type, and required delivery time.
PROCESS
A clear path from request to delivery
1
Request analysis
We verify the pump set type, equipment model, and operating conditions.
2
Data clarification
If necessary, we’ll clarify the material, capacity, operating pressure, quantity, and delivery region.
3
Cost calculation
We prepare a commercial proposal based on the required configuration, order quantity, and delivery terms.
4
Delivery
After approval, we prepare the order for shipment according to the agreed terms.
Not sure if it's a good fit Rotor 1.5L8?
Send the equipment model, a photo of the current part, or the material type. We will help verify the right solution.
Related products
Products from category
In stock - ready to ship
International shipping is available
Rotor SD7-2.5
Maximum grain size
3 mm
Injection pressure
25 bar
Productivity at 200 rpm
13 l/min
Productivity at 400 rpm
26 l/min
In stock - ready to ship
International shipping is available
Rotor D4-1.4
Maximum grain size
2 mm
Injection pressure
- bar
Productivity at 200 rpm
4 l/min
Productivity at 400 rpm
8 l/min
In stock - ready to ship
International shipping is available
Rotor 2L7
Maximum grain size
10 mm
Injection pressure
20 bar
Productivity at 200 rpm
120 l/min
Productivity at 400 rpm
240 l/min
