top of page
压缩机设备
Rotors Tech 专注于制造高品质压缩机设备，满足各行各业的多样化需求。我们的压缩机旨在提供卓越的性能、可靠性和能源效率，确保为客户提供最佳的生产力和成本节约。
Separator oil cleaning PSM 2-4
Mobile separator oil cleaning PSM 2-4 UKhL4 designed for vacuum drying.
Operating conditions PSM2-4 UKhL4:
- ambient temperature 283-308 K (10-35 ° C);
- atmospheric pressure 84-106.7 kPa (630-800 mm Hg) art);
- altitude up to 2000 m.;
- treatment of corrosive liquids at the plant is prohibited;
- nominal parameters of the unit refer to its operation at ambient temperature of 20 ° C and oil heating up to 65° C.
The installation can be used for similar cleaning of mineral oils having a viscosity at a 500S temperature of not more than 70mm2/s (St).
The plant is intended for use in power plants, substations, other energy facilities and enterprises engaged in the regeneration of oils for technical purposes.
Operating conditions PSM2-4 UKhL4:
- ambient temperature 283-308 K (10-35 ° C);
- atmospheric pressure 84-106.7 kPa (630-800 mm Hg) art);
- altitude up to 2000 m.;
- treatment of corrosive liquids at the plant is prohibited;
- nominal parameters of the unit refer to its operation at ambient temperature of 20 ° C and oil heating up to 65° C.
The installation can be used for similar cleaning of mineral oils having a viscosity at a 500S temperature of not more than 70mm2/s (St).
The plant is intended for use in power plants, substations, other energy facilities and enterprises engaged in the regeneration of oils for technical purposes.
Mobile compressor station GDP-12/10
Mobile compressor station GDP-12/10 is designed to produce compressed air and supply them with pneumatic tools, pneumatic drives, blasting equipment for various surfaces, drilling equipment, as well as during construction and installation, road repair and other works, where you need a mobile, cost-effective, energy-independent installation to obtain compressed air
Compressor unit 3ВШ1,6- 4/6-400 У1
This compressor can be used as a booster compressor for secondary compression of air at low speeds.
Mobile compressor station GDP-12/7
Model GDP-12/7 is a diesel screw mobile station used to generate compressed air used in pneumatic mechanisms and tools. Also, the station is GDP-12/7 effective during a number of road, repair, installation and construction works. The equipment is produced by the Ukrainian PTMZ plant.
Features and characteristics of the station GDP-12/7
The GDP-12/7 model has a direct drive and uses diesel fuel for work, the design does not imply the presence of cylinders. High efficiency is achieved due to the performance of 12,000 l/min.
The station has a fuel tank capacity of 130 liters and a weight of 1600 kg. The operating capacity is 90 kW with a fuel consumption of 17.5 kg/h.
Advantages of a mobile station GDP-12/7
Important advantages of this model include:
the presence of noise-absorbing materials that make the use of the station as quiet and comfortable as possible;
Ease of use through the introduction of an automatic function
convenient, informative display system;
ergonomic shape and modern laconic design;
availability of air purification system;
durability (minimum operating time before overhaul 10,000 hours).
The station GDP-12/7 implemented the principles of efficiency, economy and rationality.
Features and characteristics of the station GDP-12/7
The GDP-12/7 model has a direct drive and uses diesel fuel for work, the design does not imply the presence of cylinders. High efficiency is achieved due to the performance of 12,000 l/min.
The station has a fuel tank capacity of 130 liters and a weight of 1600 kg. The operating capacity is 90 kW with a fuel consumption of 17.5 kg/h.
Advantages of a mobile station GDP-12/7
Important advantages of this model include:
the presence of noise-absorbing materials that make the use of the station as quiet and comfortable as possible;
Ease of use through the introduction of an automatic function
convenient, informative display system;
ergonomic shape and modern laconic design;
availability of air purification system;
durability (minimum operating time before overhaul 10,000 hours).
The station GDP-12/7 implemented the principles of efficiency, economy and rationality.
Compressor station PKSD-5,25
The main task of the compressor station is to generate compressed air and supply them with pneumatic mechanisms and tools. Our website presents a mobile installation, which is designed for work in industry, used in construction and installation, road works. The technical parameters of the compressor station allow you to connect to it several units operating simultaneously.
The unit is made in accordance with the norms and standards on modern equipment, which guarantees its uninterrupted operation for many years. Due to the simplicity of the design, the reliability of the equipment can be used in any conditions.
Advantages of a compressor station
The presence of a compressor station indication system, which informs the operator about the necessary data for operation, simplifies the operation of the equipment. No special skills are required for management. If desired, the basic installation can be understaffed, expanding its capabilities.
The presence of wheels allows you to transport it with maximum comfort, and the functioning of the brake system provides a towing speed of the station of about 70 km/year. One of the main advantages of the equipment is the possibility of obtaining air of the required temperature by using heat exchange devices. Additional options provide high frequency air. Adjustment of the operating parameters of the plant occurs automatically with the subsequent transition to idle. Call and order quality equipment from us!
The unit is made in accordance with the norms and standards on modern equipment, which guarantees its uninterrupted operation for many years. Due to the simplicity of the design, the reliability of the equipment can be used in any conditions.
Advantages of a compressor station
The presence of a compressor station indication system, which informs the operator about the necessary data for operation, simplifies the operation of the equipment. No special skills are required for management. If desired, the basic installation can be understaffed, expanding its capabilities.
The presence of wheels allows you to transport it with maximum comfort, and the functioning of the brake system provides a towing speed of the station of about 70 km/year. One of the main advantages of the equipment is the possibility of obtaining air of the required temperature by using heat exchange devices. Additional options provide high frequency air. Adjustment of the operating parameters of the plant occurs automatically with the subsequent transition to idle. Call and order quality equipment from us!
Compressors piston PK-1.75A, PK-3.5A, PK-5.25A
For production of compressed air and supply of them various pneumatic tools and mechanisms.
Compressor unit УКВШ-5/7
Compressor units are designed to supply compressed air pneumatic tools and mechanism drives in underground mining passages and above-shaft buildings, in which "Safety rules in coal mines" allowed the use of electrical equipment in the production of "RV-3V" with operation in long-term mode (S1) and repeatedly-time mode (S3), PV-40% for the supply of braking devices of mine lifting machines, as well as for use in other industries where compressed air with specified parameters is required.
Compressor KT 6
KT6, KT7 and KT6El сcompressors are designed to produce compressed air required to power brakes
provision and other pneumatic systems and devices of the rolling stock of railway transport.
provision and other pneumatic systems and devices of the rolling stock of railway transport.
Compressor unit VVE-75
Compressor unit VVYe-75 is designed to supply compressed air to various systems of pneumatic tools and equipment. Production of general industrial.
Compressor Unit ВВЕ-30
The compressor unit presented on the site is used to supply compressed air to pneumatic systems, it is considered especially popular when operating excavators.. Modern equipment meets ISO standards and is implemented with a guarantee from the manufacturer, which allows you to make sure of the high quality of the equipment. At the same time, the cost of the goods will pleasantly surprise. The equipment has a high service life and is easy to assemble. On the site you can order additional equipment. After the acquisition, the client gets the opportunity to use the services of qualified specialists who will help to establish the process of work and advise on operating conditions..
High-quality compressor unit for pneumatic systems.
A significant advantage of the compressor unit is the filling with oil for the entire cycle, which prevents the need to top it up during operation. The modern unit provides a low level of noise and vibration, which creates additional convenience for the employee. The equipment, if possible, with additional options, provides a smooth start of the drive electric motors and other amenities for maximum efficiency.. In the process of functioning of the installation, you can break
High-quality compressor unit for pneumatic systems.
A significant advantage of the compressor unit is the filling with oil for the entire cycle, which prevents the need to top it up during operation. The modern unit provides a low level of noise and vibration, which creates additional convenience for the employee. The equipment, if possible, with additional options, provides a smooth start of the drive electric motors and other amenities for maximum efficiency.. In the process of functioning of the installation, you can break
Compressor unit GSh1-4-1.5-11/11-17
The GSh1-4-1.5-11/11-17 plant is designed to compress vapors of hydrocarbon gases (propane, butane and their mixtures), for use in oil refineries, to compress gasoline vapors formed during loading from a tank to a liquid fraction and pliable discharge into tanks. It is also widely used to compress methane vapors when replacing obsolete equipment at enterprises, carbon dioxide and natural gas, for completing automobile gas-filling compressor stations.
Features of the compressor unit GSh1-4-1.5-11/11-17. The model has an asynchronous electric motor in explosion-proof design, 380V voltage and 50Gts frequency. The lubrication system of the movement mechanism is combined under pressure and spraying. Compressor plant size - 2300x1800x1350 mm, weight - 2000 kg.. The compressor has a wide range of productivity from 0.5 to 24 m ³/min and discharge pressure (up to 230.0 kgf/cm ²).
Advantages of installing GSh1-4-1.5-11/11-17. The installation of this model does not pollute the product gas with oil and can work both in the mode of draining the liquid phase of propane-butane, and in the mode of pumping the vapor phase from a railway or tank truck.
Compressor units are equipped with visual inspection devices
Features of the compressor unit GSh1-4-1.5-11/11-17. The model has an asynchronous electric motor in explosion-proof design, 380V voltage and 50Gts frequency. The lubrication system of the movement mechanism is combined under pressure and spraying. Compressor plant size - 2300x1800x1350 mm, weight - 2000 kg.. The compressor has a wide range of productivity from 0.5 to 24 m ³/min and discharge pressure (up to 230.0 kgf/cm ²).
Advantages of installing GSh1-4-1.5-11/11-17. The installation of this model does not pollute the product gas with oil and can work both in the mode of draining the liquid phase of propane-butane, and in the mode of pumping the vapor phase from a railway or tank truck.
Compressor units are equipped with visual inspection devices
Electrocompressors EKVO
Electrocompressors EKVO - 0.3/8 - 13, EKVO - 0.8/9 are designed to generate compressed air and power them pneumatic trolleybus system (EKVO - 0.3/8 - 13), electric trains or diesel trains (EKVO - 0.8/9). Electrocompressor EKVO - 0.3/8 - 13 is installed on trolleybuses ZIU, YuMZT1, YuMZT2 and interchangeable with electrocompressor EK 4 - VM.
bottom of page