top of page
STATORS
Stator D6-3 Twister
Characteristics:
Stator Diameter: 89 mm
Stator Length: 270 mm
Rubber Quality: 73 Shore
Flow Rate (400 I 200 RPM): 20 l/min I 10 l/min
Max. Grain: 3 mm
Rotor: D6-3 Rotor
Stator Diameter: 89 mm
Stator Length: 270 mm
Rubber Quality: 73 Shore
Flow Rate (400 I 200 RPM): 20 l/min I 10 l/min
Max. Grain: 3 mm
Rotor: D6-3 Rotor
Stator D6‐3 Topgun
Characteristics:
Stator Diameter: 89 mm
Stator Length: 270 mm
Rubber Quality: 73 Shore
Flow Rate (400 I 200 RPM): 20 l/min I 10 l/min
Max. Grain: 3 mm
Rotor: D6-3 Rotor
Stator Diameter: 89 mm
Stator Length: 270 mm
Rubber Quality: 73 Shore
Flow Rate (400 I 200 RPM): 20 l/min I 10 l/min
Max. Grain: 3 mm
Rotor: D6-3 Rotor
Stator D8-2
Characteristics:
Weight 2,48 kg
Stator length 273 mm
Stator diameter 90 mm
The maximum grain size is 3 mm
Injection pressure 25 bar
Productivity I/min. at 200 pm 16 l
Productivity I/min. at 400 pm 32 l
The ROTORS TECH D8-2 stator and rotor are used on plastering stations PFT, PUTZMEISTER, BRINKMANN, M-tec for plastering works.
The screw pair is the main element for pressurizing the plastering hose.
Weight 2,48 kg
Stator length 273 mm
Stator diameter 90 mm
The maximum grain size is 3 mm
Injection pressure 25 bar
Productivity I/min. at 200 pm 16 l
Productivity I/min. at 400 pm 32 l
The ROTORS TECH D8-2 stator and rotor are used on plastering stations PFT, PUTZMEISTER, BRINKMANN, M-tec for plastering works.
The screw pair is the main element for pressurizing the plastering hose.
Stator D7-2.5
Characteristics:
Weight 2,48 kg
Stator length 273 mm
Stator diameter 90 mm
The maximum grain size is 3 mm
Injection pressure 25 bar
Productivity I/min. at 200 pm 13 |
Productivity I/min. at 400 pm 25 l
It is used on all plastering stations in 380 V mode - KALETA, PFT, PUTZMEISTER, MIXXMANN, MAI, M-TECH, UTIFORM, and others.
The screw pair is the main element for pressurizing the plastering hose.
Weight 2,48 kg
Stator length 273 mm
Stator diameter 90 mm
The maximum grain size is 3 mm
Injection pressure 25 bar
Productivity I/min. at 200 pm 13 |
Productivity I/min. at 400 pm 25 l
It is used on all plastering stations in 380 V mode - KALETA, PFT, PUTZMEISTER, MIXXMANN, MAI, M-TECH, UTIFORM, and others.
The screw pair is the main element for pressurizing the plastering hose.
Stator 2L8
Characteristics:
Stator Diameter: 193 mm
Stator length: 655 mm
Rubber quality: 63 Shore
Flow Rate (@ 400 I 200 RPM): 560 l/min | 280 l/min
Max. grain size: 16 mm
Stator Diameter: 193 mm
Stator length: 655 mm
Rubber quality: 63 Shore
Flow Rate (@ 400 I 200 RPM): 560 l/min | 280 l/min
Max. grain size: 16 mm
Stator 2L6
Characteristics:
Stator diameter: 101.6 mm
Stator length: 535 mm
Rubber quality: 56 Shore
Flow Rate (@ 400 I 200 RPM): 65 l/min I 34 l/min
Max. grain size: 8 mm
What machines work with the 2L6 screw pump?
Various machines work with this very popular rotor stator model. The 2L6 pumps different materials and is used for machines such as the S5 or the SP11. It conveys different materials, such as mortar, screed, grout, cement or refractory material.
Stator diameter: 101.6 mm
Stator length: 535 mm
Rubber quality: 56 Shore
Flow Rate (@ 400 I 200 RPM): 65 l/min I 34 l/min
Max. grain size: 8 mm
What machines work with the 2L6 screw pump?
Various machines work with this very popular rotor stator model. The 2L6 pumps different materials and is used for machines such as the S5 or the SP11. It conveys different materials, such as mortar, screed, grout, cement or refractory material.
bottom of page